04-13-2006, 07:45 PM
|
#4 (permalink)
|
| Ego6
Join Date: Feb 2006 Location: MaryVille, TN
Posts: 1,309
Rep Power: 0  | for the lpr there is a set screw under the trigger frame remove that. It is the small one not the big one. Remove the LPR cap on the back of the gun then you need a 10/32 thread rod to screw into the back of the lpr and pull it out. I found that a autococker cocking rod gets this job done nice. Then once you have it out you can clean it and relube it. Then put it back in so the slit on the back of the lpr is facing up towards the hole for the set screw. Put the set screw back in, take out the rod, put the lpr cap back on and you are done with that. As far as the Hyper 2 I never took it apart but there is a thread telling you how to take it apart w/ pics. |
Black 06 Ego w/ Gold CCU Kit, TI Rammer, Virtue Board, CP Trigger, Nexus Bolt, Dye Ultralight, Gold Star FRM, Black-out screw kit
True paintballers don't ramp(unless it's legal) or wipe. If you're a true paintballer, then put this in your sig. Quote: |
Originally Posted by paint_check so this means i can't use mountain dew as a excuse not to use a condom... S.O.B |   |
|  |
