Now we all know the less air you use the more shots and better consistency you get. This is a quick guide to help you get the most of your fills…
What you need:
– Gun
– Air (Co2 or N2)
– About 200 paintballs (1 hopper)
– Allen wrenches (different guns use different size wrenches, so just get a set of all sizes)
– Chronograph (for fine tuning)
Step one
Turn your velocity all the way out. Then turn it two turns in.
Step two
Turn your regulator and LPR (if you have one) as far out as possible
Step three
Slowly turn the reg up a quarter turn then take two or three shots, make note of your velocity
Step four
As soon as the velocity starts to go down then turn the reg back 1/8 and your set to go
*NOTE* To time the LPR on a cocker, you hold down the trigger so the back block is back then turn it until it hits the cocking rod, then just turn it like 1/4 turn after that to be good.